• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 KIA Stinger Forum and KIA Stinger community dedicated to KIA Stinger owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the KIA Stinger Forum today!


19x8.5 & 19x11s with 295s.... lookin good!

Messages
8
Reactions
8
#1
Variant Wheels "Xenon" in Satin Gunmetal.
Caps painted Brembo Red.

19x8.5 255/35-19 Michelin 4s
19x11 295/30-19 Michelin 4s

NO RUB. Flush. Owner: Spider55

stinger3.jpg
 

sschmuve

New Member
Messages
13
Reactions
7
State
Non-US
Country
United States
#2
Just one pic. Such a tease!

Sent from my SM-N960U using Tapatalk
 
OP
jl.rubitron
Messages
8
Reactions
8
Thread Starter #3
20190607_161927.jpg 20190607_160532.jpg 20190607_153957.jpg 20190607_153234-01.jpeg 20190607_160622-01.jpeg
 
Messages
191
Reactions
18
State
TX
Country
United States
#4
Damn that's sexy. Needs a slight drop but otherwise perfect.
 

robz32

2000 Posts Achieved
Staff Member
Messages
2,045
Reactions
665
City
Houston
State
TX
Country
United States
What I Drive
Stinger GT2
#5
Those look great.
Agree with @MiBlugt it needs a drop now. Get some ARK springs and that will put it at the perfect stance.

Sent from my SM-G960U using Tapatalk
 
Messages
3
Reactions
2
What I Drive
2019 Stinger GT Limited
#6
Offsets?


Sent from my iPad using Tapatalk
 
Messages
24
Reactions
10
#7
So we can run 11 inches wide in the rear with no rubbing?

What offset did you use for that?
 

spider55

1000 Posts Achieved
Staff Member
Messages
1,785
Reactions
612
City
Coolidge
State
AZ
Country
United States
What I Drive
2019 stinger GT1
#8
Yes, these wheels were cut for my car, If you have the stock sway bar endlinks, with the car off the ground the sway bar barely touches the inside if the wheel, so as long as you don't jump your car you will be fine. One thing about running that wide of a tire, your NOT going to be able to slam the car to the ground. I went with the Eibach pro lowering springs which dropped it an inch from stock height.

Welcome aboard
 

Attachments

Messages
24
Reactions
10
#10
Yes, these wheels were cut for my car, If you have the stock sway bar endlinks, with the car off the ground the sway bar barely touches the inside if the wheel, so as long as you don't jump your car you will be fine. One thing about running that wide of a tire, your NOT going to be able to slam the car to the ground. I went with the Eibach pro lowering springs which dropped it an inch from stock height.

Welcome aboard
Oh nice. I think the drop is perfect and glad you mentioned it, as that was the route I was considering. I was thinking about actually including the front & rear sway bars too, the total Eibach package.

How does it ride compared to stock after the Eibach Pros?
 

spider55

1000 Posts Achieved
Staff Member
Messages
1,785
Reactions
612
City
Coolidge
State
AZ
Country
United States
What I Drive
2019 stinger GT1
#11
Over all it rides pretty good, it's a little stiffer in the front then the stock springs. Just make sure when you have the front springs installed that the bump stop is cut in half. With the setup I have, it handles nice around high speed corners, I'm satisfied with it.
You can take a look under my car in my GARAGE..
 
Last edited:

spider55

1000 Posts Achieved
Staff Member
Messages
1,785
Reactions
612
City
Coolidge
State
AZ
Country
United States
What I Drive
2019 stinger GT1
#13
There is about a 1/4in of poke on the rear, if that...
 

Attachments

spider55

1000 Posts Achieved
Staff Member
Messages
1,785
Reactions
612
City
Coolidge
State
AZ
Country
United States
What I Drive
2019 stinger GT1
#15

Similar threads



Top